Rocom Doortello Home Guía de usuario descargar pdf (Pagina 19)

User guideDoortello HomeIssue 1.00

Page 19

special busy tone 220/220. If needed, you can reprogram the tones. To

reprogram a busy tone please follow this procedure:

*#8 OK tone #1 {make busy tone 1 in ms x 10} OK tone {break busy tone 1

in ms x 10} OK tone {No. of busy tone to be detected before hang up} OK tone

*#8 OK one #2 {make busy tone 2 in ms x 10} OK tone {break busy tone 2

in ms x 10} OK tone {No. of busy tone to be detected before hang up} OK tone

*#8 OK tone #3 {make busy tone 3 in ms x 10} OK tone {break busy tone 3

in ms x 10} OK tone {No. of busy tone to be detected before hang up} OK tone

For the make (tone duration) and the break (tone pause) values from 00 to

99 can be inserted. For the number of tone to detect before call termination

values from 1 to 9 can be programmed.

Example:

n You have to program te detection of a busy tone with a make of 200 ms (20 x

10) and a break of 200 ms, the call has to be terminated after the detection of

min. three tones. Input

*#8 OK tone #120 OK tone 20 OK tone 3 OK tone

Please note!

The number of tone to be detected before terminating the call should not

have a too small value. If this is the case it might be that the device can

detect normal speech as a busy tone and truncate the call. We suggest to not

use values below 3.

Ring back tone detection

The Doortello Home can count the numbers of rings sent to the called party by

detecting the ring back tone. As default the ring back tone detected is the

standard 1000 make and 4000 break tone. If needed you can change this tone

following this procedure:

*#8OK tone #4 {make 1 in ms x 10} OK tone {break 1 in ms x 10} OK tone

{make 2 in ms x 10} OK tone {break 2 in ms x 10} OK tone

The make values 1 and 2 (duration of the tone) and the break value 1 (pause of

the tone) can be between 000 and 255, the break value 2 can be between

000 and 999.

Example:

n You want to detect a double ring back tone with a make of 250 ms (25 x 10),

a break of 500 ms (50 x 10), a second make of 250 ms (20 x 10) and a second

break of 4000 ms (400 x 10) duration. Input:

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Sin comentarios

Rocom Doortello Home Guía de usuario Pagina 19