Rocom Doortello Home Guía de usuario descargar pdf (Pagina 18)

User guideDoortello HomeIssue 1.00

Page 18

Driver contacts activation time

The driver contacts can be activated for a programmed time. As default the

activation time for all contacts is set to 5 seconds. Also the contacts can be

programmed to be automatically activated for all the duration of the

conversation. To modify the activation time of the driver contact please follow this

procedure:

*#7 OK tone #4 {Activation time in s} ** {Driver contact no.} OK tone

Values from 01 to 98 can be programmed. The value 99 will enable the

automatic activation of the contact for all the line seizure duration.

As driver contact no. the values 1 (contact 1) and 2 (contact 2) can be used.

Example:

n You want to program the contact 2 to be activated for all the line seizure

duration (i.e. to switch on a video camera). Input:

*#7 OK tone #499 OK tone **2

Flash time

You can insert a flash signal in the telephone number you store for the chime

buttons otr speed dial numbers. The flsh signal is set programming the code

##4 instead of a digit. As defaut the flash has a duration of 80 ms. If need you

can enhance or reduce this time using the following procedure:

*#7 OK tone #9 {flash time in ms} OK tone

You can use values from 001 to 100. The value 000 will deactivate the

flash function.

Example:

n You want to enhance the flash time to 100 ms. Input:

*#7 OK tone #9100 OK tone

Busy tone detection

The Doortello Home door phone can detect a busy tine to terminate the call and

the end of a conversation. As default the device can detect three different busy

tones: standard CO busy tone 500/500, standard PBX busy tone 200/400 and

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Sin comentarios

Rocom Doortello Home Guía de usuario Pagina 18